Comp-N-Choke chokes available for ALL guns, ALL gauges from Negative 0.005 constrictions to 5X FULL, 0.640 in Black Oxide, Stainless Steel, Gold Titanium Nitride and by special order custom CAMO.
Please click here FOR: Choke tube information page.
Supported by more than 20 years of research into shotgun ballistic dynamics and tight tolerance computer (CNC) machining, Comp-n-Choke choke tubes deliver more precise, denser patterns to your target.
The Choke design allows gases to vent through slots, generating a brake system, which reduces recoil and gives quick recovery for the second shot. The slots also slow the wad, allowing the shot column to exit the choke clearly ahead of the wad. This eliminates flyers (when the wad drives through the shot column) delivering a more dense pattern. The more dense pattern allows you to use a more open constriction, providing a larger pattern and improving your performance.
Comp-n-Choke tubes are computer (CNC) machined for precise tolerances with high quality steel. The extended portion of the tubes offer a conical parallel design, with the final constriction of the choke held roughly 1 1/8 inches. Chokes are rollmarked for quick identification. Then extend design allows easy field installation and quick changes.
Please click here FOR: Lead shot suggested maximum choke constriction chart.
Chokes for most popular guns are stocked in a variety of finishes: black, stainless or gold titanium. Camo available by special order.
Custom sizes are available on request.
Please click here FOR: Proper Choke information chart.
| CNC I |
American Arms (.725) |
$52.95 |
| CNC I |
Blaser F3 (.732) |
$52.95 |
| CNC I |
Blaser F3 (.735) |
$52.95 |
| CNC I |
Browning Invector (.741) |
$52.95 |
| CNC I |
Remington (.730) |
$52.95 |
| CNC I |
Stoeger Standard (.730) |
$52.95 |
| CNC I |
Winchester (.730) |
$52.95 |
| Shown in order box as Add $2.00 |
| $52.95 plus $2.00 makes total price $54.95 |
| CNC II |
Benelli Mobilchoke (.723) |
$54.95 |
| CNC II |
Beretta Mobilechoke (.723) |
$54.95 |
| CNC II |
Browning Invector Plus (.741) |
$54.95 |
| CNC II |
Caesar Guerini (.725) |
$54.95 |
| CNC II |
CZ (.723) |
$54.95 |
| CNC II |
Franchi - New style (.723) |
$54.95 |
| CNC II |
Franchi (.725) |
$54.95 |
| CNC II |
H&K Fabarm Double |
$54.95 |
| CNC II |
Kolar (.740) |
$54.95 |
| CNC II |
Kolar (.750) |
$54.95 |
| CNC II |
Krieghoff (.732) |
$54.95 |
| CNC II |
Krieghoff (.735) |
$54.95 |
| CNC II |
Mossberg 500 / 9200 / 930 (.730) |
$54.95 |
| CNC II |
Perazzi (.725 new style) |
$54.95 |
| CNC II |
Perazzi (.736 new style) |
$54.95 |
| CNC II |
Remington ProBore (735) |
$54.95 |
| CNC II |
Ruger Red Label (.745) |
$54.95 |
| Shown in order box as Add $7.00 |
| $52.95 plus $7.00 makes total price $59.95 |
| CNC III |
Benelli CrioChoke (SBE II / M-2) (0.723) |
$59.95 |
| CNC III |
Benelli CrioChoke (Super Sport / Sport II) (0.723) |
$59.95 |
| CNC III |
Beretta Optima (0.733) |
$59.95 |
| CNC III |
Beretta Xtrema Optima Plus (0.733) |
$59.95 |
| CNC III |
Caesar Guerini Maxis ( 0.735) |
$59.95 |
| CNC III |
Mossberg 835 / 935 Ulti-Mag (0.775) |
$59.95 |
Benelli has produced some of their SBE II, Sport II, M II with conflicting thread patterns. Some are at the end of barrel, some are recessed approximately 0.75 of an inch. Please call me 866.449.7445 or email me kurt@windwalkeroutdoors.com to make sure I ship the correct thread pattern for your gun.
Please click here FOR: Full information turkey/card shooter choke tube chart.
If you have any special needs or don’t see your gun type listed please contact me. I will be happy to help you with deciding which choke tube your application needs, or designing a special choke tube with constrictions down to 0.640. If you are interested in a choke for a non-standard bore, a custom constriction or a Camo finish, please contact me sales@windwalkeroutdoors.com or call me 866.449.7445
I definitely DO NOT recommend or advise shooting any hard non-toxic such as Steel, Hevishot, Tungsten Iron, or any combination of these or similar non toxic through any choke tube tighter than 0.025 constriction (Improved Modified.) I do not recommend this use and will not be responsible for any damage that may come from using these tighter chokes on any gun.
100% U.S.A. designed, manufactured and guaranteed!!!
Please contact Windwalker Outdoors by phone at 866.449.7445 or by email at kurt@windwalkeroutdoors.com if I can be of assistance in any way.
All Categories 